Correct the Scotti Naval Rifle magazine capacity

[Suzumebachi14]

You mean this book ?
https://www.libreriamilitareares.it/prodotto/le-armi-della-fanteria-italiana-1919-1945/

[Emperor_Yoshiro]

That’s the one sorry I was playing the event xD

[Suzumebachi14]

CHECKMATE:

Battle Pass: Sixth Season of 2025

[Image_1754009643040] Long magzine has 40 round. source： [Image_1754010033416]

And with the 10 cutouts in the small mag, and with the fact that it is pretty much half the size of the 40 round mag, it is almost certain that this mag has a 20 round (so two-row mag) capacity.

[NonNational]

I think it can hold more than 20 round, 22 to 24 is more reasonable.

Battle Pass: Sixth Season of 2025

[Image_1754009643040] Long magzine has 40 round. source： [Image_1754010033416] [Screenshot_20250801_095143_edit_112109303492283] 40 round long magazine has 17 witness holes, and we can infer that each witness hole means two bullets. If the bottommost hole represents the first bullet (as it should be), then the topmost hole is the 33rd bullet, and there are still 7 bullets above the hole (which is clearly a double stack magazine). [Screenshot_20250801_102505_edit_114042888078941] The sho…

[Suzumebachi14]

Little update on my investigation here:

Battle Pass: Sixth Season of 2025

Also, now I am like 80% sure that the guy who made the Scotti Naval Rifle model messed up with the dimensions of the gun, that’s why the mag looks to be a single stack mag when you reload: [image] And when I count the bullets on the model, it definitely cannot fit more than 10 rounds in it: [image] -First the most visible mistake is the rear sight, as you can see, the ingame model has a very visible rear sight, but the blueprint shows that it didn’t have one, or at least a very small one (li…

And here:

Battle Pass: Sixth Season of 2025

Ah, I also forgot to mention that the blueprint of the gun shows that the stock goes slightly to the sight of the gun, as you can see on the blueprint, kind of like on the Type 11 japanese MG, and I don’t think that this feature is present of the ingame model too. I also suspect that they decided to fit a vertical grip on the gun because the handguard was just too wide, so it would be more comfortable to shoot as a result. And I think it is also why they made a thinner, grained part in the hand…

[Suzumebachi14]

Yeah, I’m like 90% sure now, the rifle as it is currently modeled ingame is too thin compared to the original blueprint, we can clearly see that the receiver is wider than the buttstock, while it should be the opposite (this video here gives a clear view):

Battle Pass: Sixth Season of 2025

Its not that bad bro. Also why would you not test it with recoil perks? With or without recoil perks its pretty easy to control anyway.

And because of this small modeling mistake, as a result, the magwell too was also modeled too thin, and that’s why the designer chose to model a single stack mag, because a double stack mag wouldn’t fit in this model that is too thin, and it is also why the mag model looks like it can’t fit more than 10 rounds in it, but it should be a double stack with 20 rounds in it.

[Kriegerfaust007-live]

I dont know if this has been brought up but the magazine is offset to the right. by a good amount at least 30% meaning the magazine is at most 2/3 the width of the gun. you can see this in the original game model and the top of the schematic. now if the original gun is thick enough to fit a magazine 3 bullets side by side by side this is not an issue. as for 10 rounds did you count the magazine inside the stock. in many rifles like an iceberg a few rounds are hidden in the stock usual about five.

[Willcario]

@Suzumebachi14

Yeah, I’m like 90% sure now, the rifle as it is currently modeled ingame is too thin compared to the original blueprint, we can clearly see that the receiver is wider than the buttstock, while it should be the opposite (this video here gives a clear view):
Battle Pass: Sixth Season of 2025 - #405 by EVA_Evo

And because of this small modeling mistake, as a result, the magwell too was also modeled too thin, and that’s why the designer chose to model a single stack mag, because a double stack mag wouldn’t fit in this model that is too thin, and it is also why the mag model looks like it can’t fit more than 10 rounds in it, but it should be a double stack with 20 rounds in it.

contact the helpers about this mistake like @Euthymia07-live

[Suzumebachi14]

Should I send a message that gives links to my post ? Will this do it ? I never did that before, I prefer asking before doing this kind of thing.

[Willcario]

@Suzumebachi14

Should I send a message that gives links to my post ?

idk could do that or ping them until they respond lol

[Suzumebachi14]

@Euthymia07-live

Hi, we are certain that there is an error on the Scotti Naval Rifle magazine capacity. Could you please convey the topic from where I am writing to you, and also these posts on this other topic to the devs as proof ?

Thanks in advance !

Battle Pass: Sixth Season of 2025

Also, now I am like 80% sure that the guy who made the Scotti Naval Rifle model messed up with the dimensions of the gun, that’s why the mag looks to be a single stack mag when you reload: [image] And when I count the bullets on the model, it definitely cannot fit more than 10 rounds in it: [image] -First the most visible mistake is the rear sight, as you can see, the ingame model has a very visible rear sight, but the blueprint shows that it didn’t have one, or at least a very small one (li…

Battle Pass: Sixth Season of 2025

Ah, I also forgot to mention that the blueprint of the gun shows that the stock goes slightly to the sight of the gun, as you can see on the blueprint, kind of like on the Type 11 japanese MG, and I don’t think that this feature is present of the ingame model too. I also suspect that they decided to fit a vertical grip on the gun because the handguard was just too wide, so it would be more comfortable to shoot as a result. And I think it is also why they made a thinner, grained part in the hand…

Battle Pass: Sixth Season of 2025

One last thing: I also have a theory about the cutouts of the mag. As we can see, there are 10 cutouts on the side of the mag (the one that I am 90% sure is a 20 rounds double stack mag), these cutouts are made to check the number of rounds remaining inside the mag. But, if it is indeed a double stack (which I am sure of), then it is very likely that the cutouts would be asymmetrical on the two sides of the mag. I am convinced that, because of the fact that the mag is a double stack type, then …

[Suzumebachi14]

Is my message above good enough ? Is that how you ping ? Sorry to ask, I am really not used to do all these kinds of things on a forum, that’s pretty much one of the only forums where I write things, and I’m sometimes not here for months.

[_DELAVR]

Magazines for Scotti weapons of different designs, perhaps they can help.

[c4qph2]

@Luvs2spooge

Soviet equivalent gun

RPK-43 mag equivalent

[Luvs2spooge]

@c4qph2

RPK-43 mag equivalent

I love the RPK-43, and would love it more with a bigger magazine and in the tech tree.

[c4qph2]

With AVS-36 skin

[GeneralBrus]

Wish we had such thorough discussions about Stinger mag capacity back in the day… lol