Type 95 Kurogane w/ 7.7mm Type 92 HMG (Flexible Belt)

  • Yes
  • No
0 voters

As a potential premium or event option Off-Road Vehicle for the Japanese, I believe a Type 95 Kurogane with the 7.7mm Type 92 HMG, using a flexible belt would be a good option. According to @_DELAVR , the tripod used on the tech tree model is actually a 7.7mm Type 92 HMG tripod, but with the Type 92 omitted for the Type 11. Replacing the TT weapon back to a Type 92 is an already forwarded topic.

Type 92 HMG Flexible Belt

For this vehicle, the Type 92 would have a flexible belt, allowing for a much larger ammo capacity between reloads than the existing Type 11. Aside from this weapon change, the vehicle would be identical to the existing tech tree Type 95 Kurogane.

4 Likes

thank you, I was going to make a post about this

I don’t have the source available since there is little info about this modification on the internet, but I saw a post about this weapon on the forum before. Afaik it could hold 200 rounds unlike rigid ammo strips.

1 Like

I’m sure @_DELAVR can confirm. (Sorry for the pings)

1 Like

I am sure @Emperor_Yoshiro or @Aussie-Tachanka can tell too

Yes, I can confirm the details about both the tripod and the belt system.

To clarify the exact design: it was a semi-rigid metallic belt made of 3-round articulated links (rather than a cloth or disintegrating belt). Similar 3-round articulated belts were originally used on French Hotchkiss tank machine guns during WWI (such as on the Renault FT), and Japan purchased those tanks and machine guns along with their semi-rigid belts for evaluation after the war.

Снимок экрана 2026-11-15 201623
Снимок экрана 2026-11-15 201627

Based on that concept, Japan developed both an experimental tank variant and a limited-production aircraft variant of the Type 3 machine gun using this feed system.

Снимок экрана 2026-11-15 201425

Mechanically, rigid feed strips and semi-rigid articulated belts are completely interchangeable within the same feed block without modifying the gun itself. This applies across the Hotchkiss family—from the original French Hotchkiss and early Japanese versions (Type Ho and Type 38) to the Type 3 and Type 92. As far as I know, at least one Soviet intelligence report explicitly noted that the 7.7mm Type 92 HMG was also capable of feeding from such a semi-rigid belt.

Regarding the ammo capacity: since each articulated section holds 3 rounds (just like on the aircraft version of the Type 3), the total belt capacity has to be a multiple of 3 rather than 200—so something like 249 rounds (or a similar number divisible by 3) would be much more realistic.

3 Likes

There are pics of french 3-round Articulated Feed Belts for Hotchkiss

https://smallarmsreview.com/french-feed-devices-and-strip-loader-for-hotchkiss-model-1914-machine-guns/

For heavy tanks, the longer belt for 252 rounds was standard, whereas for smaller vehicles both 96-round (32 sections of three rounds) and even 48-round (16 sections of three rounds) were used.

^Data for french Hotchkiss belts from link above.

1 Like

images (5)

Well the most common thing that was used on them was Type 97 heavy tank machine gun but you can probably fit whatever MG you want since many where used on motorbikes and other vehicles. But Japan has a lot of armored cars just with MGs that can fit that role perfectly.

Btw, this is how 250 round ‘belt’ for Mle 1914 Hotchkiss MG looks like in Mark V tank currently in enlisted (and most possibly in WT as well).

And this is same ‘belt’ in St-Chammond (can be seen in commander’s view when out of the hatch).