Revamped Japan suggestion 🇯🇵

I see. Thanks for the heads up. I can only imagine the power of Japan once we get this weapon. The Type Hei Automatic Rifle can still miss a few shots at range in full auto. But this! With such a stable platform as the Type 2 SMG this weapon could even beat the STG and AS-44. Wonder how the Hyde Carbine will stack up against it if they decide to add it for the US.

well i would not call it stable since they reinforced it with steel plates but later decided to go back to Nambu bullets exactly because was unstable. They even called it LMG but didn’t turned well so they left the project however they used some of them in China and few in Okinawa in reality will be worse weapon then the Type Hei rifle however you will be able to see what you are shooting not like with Type Hei :smiley:

1 Like

I see. Thanks again. What was the issue exactly? Was the cartridge malfunctioning or something?

well same problem like AVT-40 it was unstable on full auto the cartridge was too big we don’t have record how it performed but we have few place where was used

1 Like

Damn. That feels bad. But I think it might be a bit manageable with the -40 percent vertical recoil reduction perk. The Hyde Carbine should be a bit more stable firing that .30 cal cartridge. But again I am not really a gun expert.

well I also have no idea how it performed in combat but the fact that they used do to shortage of automatic weapons suggest that it was last ditch option

1 Like

Yeah. Seems more like it. But atleast it will be a nice change of pace from the Type Hei Automatic Rifle. That weapon makes using anything else feel redundant at BR V.

1 Like

well yes you will have option that’s why i don’t play much BR V cuz there is very few options to Type Hei all the builds are Type Hei xD

1 Like

Yeah. True mate.

Just want to comment to +1 really, all really cool suggestions, only thing is the Ho Ro should be BR3 I think, since it is a really big gun though as you noted, highly vulnerable as well.

1 Like

As far as I know, the Nambu Type 2 (6.5mm) should look different, it should look like an earlier version like the one we have on the rank 4 study.
2024-11-15_16-34-24
But the Nambu Type 2 (6.5mm) version should have a different magazine and bipods similar to those on the Type 99 rifle.

Here’s a good illustration of what he should look like.

5 Likes

Basically a replica of the late 1942 version, it is also called the Nambu Type 2 B, it was intended to be mounted on vehicles, because of this it does not have a bayonet mount, it has been replaced by a vehicle mount, and there is a cartridge case bag mount on the right side of the weapon.

I’d like to add the Nambu Type 2 A version with 30-round magazine and bayonet to the upgrade branch, because the bayonet makes the weapon more interesting.

3 Likes

Here’s a picture of Ji Te.
2024-11-15_16-57-06

Here’s a whole bunch more photos.
image
image
image
image
image
image
image
image

If you look closely, you can see a scope mount on the left side.

5 Likes

well i never seen this one in the book the only depicted version has no magazine but it has bipod but strangely enough is probably chambered in 6.5mm cuz the standard Nambu magazine dose not fit
q1056423157.1

Yasufumi Kunimoto - doujinshi Prototype machine short gun Type 100 machine gun 2009 edition but maybe i cant translate it right

3 Likes

We need this, especially the stronger AT, BRV mortar and extra customisation … and of course the bambo spear.

But, is the AR version of the Type 2A for real? Did that really excist or is it even more elusive than the Tokyo Arsanal?

2 Likes

As far as know it was made to be carried by tankers not to be a mount weapon thats why they had to cut bayonets also the B in the name comes from British troops testing it here

Modification of the experimental submachine gun Type II A model 1942

Type II A of the 1942 model was slightly shorter than the 1934 model and did not have a device for attaching a bayonet.
The maximum set rate of fire is 820 rounds per minute. Culd be fed either 30 or 50 round.
The total length of the barrel with chamber is 241.3 mm, the rifled part with a bullet transition is 220 mm. The number of riflings is 6, with a width of 3.175 mm, a depth of 0.1524 mm, and a rifling stroke of 254 mm.
The outer surface of the barrel has segmental longitudinal lobes to increase the intensity of heat removal during prolonged shooting.
The British test group tested a modification of the Type II A submachine gun of the 1942 model showed excellent performance in automatic fire, was characterized as an easily controlled and accurate weapon with low weight, with minimal barrel drift and low recoil.
image

2 Likes

It is not necessary for mounting on tanks, but rather for armored personnel carriers and motorcycles, so instead of a bayonet, this modification has a special fastening device in front.

And this modification could be used both by the crews of the equipment and in the equipment itself, if you remove the weapon, such as from the DT 29, Type 91, Type 97 and so on.

1 Like

Where did you get this picture?

Book:
歴史に見る火器開発裏面史
image

Photos of the pages

2024-11-17_16-49-14

2024-11-17_16-49-23
2024-11-17_16-49-31

4 Likes

Japanese SMGs That are not yet in the game :jp: - Suggestions - Enlisted

Japanese LMG rework :jp: - Suggestions - Enlisted

My newest posts about Japan if some one is interested

And this is my old topic that in the future I may revamp a bit again :rofl: :rofl: :rofl:
Fixing Japanese Faction Full Tech Tree :jp: - Suggestions - Enlisted

1 Like