BRENs cyclic rates sources

Finding original WW2 data on BRENs is a major pain - buggers keep listing ‘practical’ fire rates aka desired rates for gunners to shoot at.

Fortunately, I’ve managed to get a post war source from Brits.
brens
(Enlisted would have 550 rpm for Mk I and 594 for Mk II.)
brens2

Wonder where were 480 base RPM from both BREN mk I and II were taken from for this game.

13 Likes

9 Likes

I have a question

Would this mean buffing or nerfing either versions?

I ask because M1919A6’s RoF was found to be innacurate, that its real RoF wasn’t 500 rpm like the M1919A4 and it was 550 rpm, but the changes were made to its base RoF and now it is 610 upgraded, so what would it be like for these weapons?

Well if we follow the document listed this would be the in game value if it’s implemented

Mk 1 Base RoF - > 500 - > Upgrade 10% RoF - > 550
Mk 2 Base RoF - > 540 → Upgrade 10% RoF - > 590 (After rounding)

2 Likes

Bren gun supremacy, hehehe. :uk: :uk: :uk: :uk:

Would also give people a reason for using the Mk II - the Mk I is smother shooting, with moderately better dispersion, while the Mk II would have slightly higher RoF.

As opposed to the Mk I just being better, as things are now. And the best part - the stat differences wouldn’t be arbitrary either; well supported RoF differences, with a minor handling difference in favour of the earlier more expensive manufacture version.

2 Likes

By the way, I would also pay attention to the barrel weight. Nearly 3 kg for the Bren Mk II is quite high for a light machine gun; I can also recall the Japanese Type 99 with a barrel weight of around 2.7 kg. In my opinion, it would have been interesting to play into this and make them more accurate. Instead, the developers decided to give them a high sprint speed.

2 Likes
Spoiler



Buff Bren Mk l 100 by bring down it's BR from 4 to 3 - #92 by Astulian

I’ve posted before some references to experiments on increasing BREN RPM for AA use.
These experiments included enlarging gas hole and barrel port as well as adding stronger buffer spring.
Resulting cyclic rates were increased to 670-750 RPM.

Further reading revealed an interesting off-hand comment (bottom of the pic)

It’s mentioned how a normal version of BREN mk I could already run at 600 RPM with gas regulator setting no 1.

Several guns already have adjustable cyclic rates ingame (like M1941 Johnson).
Adding 600 (660 when maxed) RPM setting for a certain AA version of Bren mk I could be worthwhile.

1 Like

Can you link the source please?