[Penetrattion if it was modelled correctly]
I have made numerous posts on WT especially regards to the fact that all of the AP/APBC shells are underperforming severely due to being badly implemented.
So now I’m going to show you examples of scenarios where you currently aren’t able to penetrate US tanks with the Type 1 47mm Tank Gun, but would be able to if the gun performed correctly.
Scenario 1
Toughest Part of M3 Lee frontal armour.
Type 1 47mm in WT / Enlisted cannot penetrate at 200m
Type 1 47mm After fix will penetrate it even at 500m
Scenario 2
Type 1 47mm in WT / Enlisted needs the sherman to be at this angle to penetrate the hull sides at 500m
Type 1 47mm after fix would penetrate the M4 Sherman Side armour at this angle from 500m
Scenario 3
Type 1 47mm in WT / Enlisted wont penetrate the turret here even at point blank range
Type 1 47mm after fix would penetrate that up to 250m
Scenario 4
Type 1 47mm Tank gun will currently just penetrate T-50 frontal hull armour up to 200m
Type 1 47mm tank gun after fix will penetrate T-50 frontal hull armour up to 500m